The gripper's quick-lock feature makes height adjustments simple:
1
Insert the wire through the gripper pin, unless specified otherwise.
2
Slide the gripper upward to adjust its position. Once you release it, the gripper will automatically lock onto the wire.
3
To unlock, press down the gripper pin. This allows the gripper to slide freely up and down the wire. To lock it in place again, simply release the gripper pin.
A hook gripper combines quick installation and instant adjustment features of a gripper with the simplicity of a hook:
Articles in above example:
Making a wire loop has never been faster or easier. Simply slide the wire into the opening of the gripper, and you’ll have a loop in just three seconds—no tools needed. To release the wire, just pull the pin:
Articles in above example:
Hanging objects with long wires can take a lot of time when you must pull the wire through the cap. Use a cap with a slit which makes installing even the longest wires quick and easy:
Articles in above example:
- Attachment: 412M10M6BL14
- Cap: 411MM10BL10U
- Wire: T2
To create a hanging point on a grid ceiling, use carrying rails for tool-free installation. The rails are delivered with premounted accessories, ensuring time-saving installations. The hook slides horizontally within the rail, allowing you to easily position your suspended product.
- To adjust the rail bracket, loosen the set screw using the included hex key.
- Lock the rail bracket in place by tightening the set screw again.
- Fasten the hook at desired position
The carrying rail can be adjusted into any position in the grid ceiling:
Article in the above examples:
Carrying rail: 52-AP1